Sign in

Sign in
Reset PasswordCreate an Account

Create an Account

Create an Account
Sign in

AM344C Outdoor EoC Solution

The AM344C All-In-One device is designed to provide Internet service to the subscribers’ home through existing coaxial access networks. With XPON, EoC, and HFC technology, AM344C meets CATV broadcasting, VOD, and internet service requirements of cable operators for FTTB/FTTC. It combined XPON ONU, EOC master, and Optical Receiver module in one housing. The Optical Receiver module received the optical signal from the Optical Transmitter of HFC network, and the signal processed by the PD, Amplifier, EQ and AGC to a stable RF output. The output level will be up to 104 dBµV (4*RF output). Ethernet data is delivered to ONU through the XPON network form the OLT. The EoC Master module meets Home-plug AV standards, is designed based on Qualcomm AR7410 chip-set with high anti- jamming capability OFDM technology. It will modulate the Ethernet data into EOC RF signal in the 7.5 MHz to 65 MHz. The EOC signal and CATV signal (87 to 860MHz) can run on one coaxial cable without interference. The EOC Master can provide high speed data service at 600Mbps PHY Layer speed, the MAC Layer throughput is up to 320Mpbs.

    Configurations available with 1 GPON ONU module

    Configurations available with 2 HomePlug AV EoC Master modules

    Configurations available with 1 HFC Optical Receiver

    RF output configurations with 4 outputs

    Line Power (from 90 to 264 VAC) or Cable Line Power (60VAC) optional

    35/47, 42/54, 65/87 type High/Low Filter optional to meet your network

    Supports higher RF output: 104dBµV

    AGC (from -6 to 0dBm) function for stable RF output

    Supports data throughput of greater than 300 Mbps per EOC Master module

    Supports Max link loss greater than 85 dB (40Mbps throughput in lab)

    Recommend 40 dB to 50 dB link loss for about 300 Mbps throughput

    CLI, WEB management for ONU module

    WEB, SNMP management for EOC module

    Optical Receiver status monitor and control by PON system

    019C Housing, aluminum alloy die casting shaping

    Line Power 60AC feed in and out

•    Complies with ITU-T G984.X and IEEE802.3ah standards

•    Complies with HomePlug AV international standards and IEEE 1901 Standard




AM344C All-in-One

Item

Parameter

Unit

Description

Note

Main Functional

Module Configuration

ONU


1 * XPON ONU



EOC Master


2*EOC Master



CATV


1* CATV Optical Receiver


External Interface

Fiber Port


5/8” type, 2 port, for Fiber Optic Pigtail input




COM Port


F-Type female, 4 output port for mixed EOC and CATV

signal



Power Input Port


Power cord with China plug





Mains Powered (90-264VAC) version


Uplink

Broadcast CATV


1*CATV optical, SC/UPC



Ethernet Data


1*EPON/GPON adaptive optical, SC/UPC


 

XPON ONU

Item

Parameter

Unit

Description

Note

EPON/GPON

Standard compliance


EPON: IEEE802.3ah

GPON: ITU-T G.984.X




Optical Interface


EPON: 1 * EPON 1000BASE-PX20+

GPON: 1 * GPON CLASS B+



Transmission Rate

Gbps

EPON: 1.25 downstream/upstream

GPON: 2.488/1.244 downstream/upstream



Transmission Distance

Km

EPON: 20@1:64

GPON: 20@1:128



Optical Fiber Type


Single Mode, Single Fiber



Wavelength

nm

Upstream 1310, Downstream 1490



Optical Power Tx

dBm

EPON : 0 to +4(1000BASE-PX20+)

GPON : +0.5 to +5(Class B+)


Indicator

Indicator Description

dBm

EPON: -27 (1000BASE-PX20+)

GPON: -28 (Class B+)



Network Management

Management Mode


PWR: Power up or down

PON: ONU registered

LOS: Optical Link Status

SYS: system work indicator






Function


Status monitor, Configuration management, Alarm management, Log management


 
Optical Receiver

Item

Parameter

Unit

Description

Note

Optical Specifications

Wavelength

nm

1550±10



Optical Power Input Range

dBm

-10 to +2



Recommend Optical Power Input Range

dBm

-6 to 0



Optical Input Return Loss

dB

>45


RF Specifications

Bandwidth

MHz

45 to 860



Flatness

dB

≤±1.5



Nominal RF Output Level

dBuV

104



Impedance


75 Ohm



Return Loss

dB

≥14



CNR

dB

≥51

1


CSO

dBc

≥60

1


CTB

dBc

≥60

1

Optical and Temperature AGC

Stability of RF Level

under Optical AGC

dB

≤±1



AGC Scope

dBm

-6 to 0


LED Indicator

Indicator Description


TV1: Status of Output 1 of optical receiver module

TV2: Status of Output 2 of optical receiver module

OPT-M: Optical power is nominal

OPT-L: Optical power is abnormal

PWR: Power Supply Status






Note:

1.       CNR, CSO, CTB parameter testing environment is in1550nm directly modulation transmitter, optical input -1dBmOMI=3.2%, 59CH PAL-D signal load.

 
EoC Master

Item

Parameter


Unit

Description

Note

Interface

Inband Management Port



1 * 10/100/1000M auto-negotiation, RJ45






LED Indicator

LED Indicator



PWR: Power Supply Status

CAB1: CABLE Link Status indicator1 CAB2: CABLE Link Status indicator2






Performance Parameters

RF Parameters

Frequency Band

MHz

7.5 to 65



RF Output Level

dBuv

115±5@4 RF output port


Receive Sensitivity

dBuv

45


Transmission


Mbps

PHY Layer: 600

Throughput on MAC Layer: 320



Modulation Mode



OFDM2690 carriers, 4096/1024/256/64/16/8 QAM, QPSK, BPSK, ROBO



Working Mode



TDMA/CSMA



Encryption Mode



AES-128


Standard

EOC Standard



IEEE P1901(Draft) , HomePlug AV



Ethernet Standard



IEEE 802.3, IEEE 802.3x, IEEE 802.3u

IEEE802.1P, IEEE802.1Q


Software

Network Management



WEB, CLI, SNMP




Software Features



VLAN, QOS, Bandwidth Control, Broadcast storm limitation


Physical Features

Item

Parameter


Unit

Description

Note

Physical Features

Power Supply

Line Power

V

90 to 264 AC

60 AC optional



Cable Power

V


Power Consumption


W

<80



Net Weight


kg

3.7



Environment Attribute

Working Temperature


-20 to 65


Storage Temperature

-40 to 85

Working Humidity

10% to 90% non-condensing

Storage Humidity

10% to 90% non-condensing


image.png

Series Recommendation
Related Information

Get in touch with our experts

Feedback