- BTS >Wireless Base Station >CP530 Base Station
CP530 Base Station
CP530 series is a 5GHz 300Mbps 2×2 MIMO outdoor wireless CPE based on 801.11a/n technology. It is a high-performance cost-effective solution for long-distance wireless networks.
• TDMA greatly improves network scalability in throughput and latency
• Compliant with 802.11a/n, speed up to 300 Mbps
• Multi-operation modes support Gateway/WISP/Client/Access Point/Repeater
• 16 dBi dual-polarized antenna expand coverage and enhance coverage density
• Supports RSSI signal LEDs
• Transmit power selectable and distance control
• Supports QoS: traffic control and WMM
• Supports MAC and IP address filter
• Supports WiController SNMP, remote management
• Passive PoE (24V DC) for flexible deployment
Radio | 802.11a/n radio (Atheros 600MHz) Speed up to 300 Mbps Frequency Range: 5.150 ~ 5.250 GHz 5.150 ~ 5.250 GHz 5.250 ~ 5.350 GHz (Supports DFS) 5.470 ~ 5.725 GHz (Supports DFS) 5.725 ~ 5.825 GHz Tx power: up to 23 or 27 dBm Rx Sensitivity 300M: ‑74 dBm @ 10% PER 54M: ‑78 dBm @ 10% PER 1M: ‑98 dBm @ 10% PER |
Antenna | 16 dBi dual‑polarized directional antenna Beamwidth (HPBW) Horizontal: 45° Vertical: 14° Open space up to 1 ~ 10 km (dependent) |
Interfaces | 1 × 10/100/1000 Base‑T Ethernet (RJ45 with passive PoE) |
Security | Integrated firewall WPA/WPA2; WPA‑PSK/WPA2‑PSK (AES/TKIP) Encryption: 64/180‑bit WEP |
LED | Power: On/Off LAN: On/Off/Flashing WLAN: On/Off/Flashing RSSI Signal: 1, 2, 3 |
Certification | CE, RoHS |
Warranty | 2 years |
Power | 24V DC, 0.75A Power consumption: 6W |
Physical Parameters | Dimensions: 200 × 90 × 68 mm Weight: 0.27 kg Enclosure: IP65 weatherproof plastic ESD protection: 15kV Lightning protection: 4kV Working temperature: ‑40 ~ 80°C Storage temperature: ‑40 ~ 85°C Working humidity: 10 ~ 95% (non‑condensing) |
Datasheet
White Paper
Press Releases
Briefings 1
Briefings 2
Videos, etc.
QRG
Manual1
Manual2
Get in touch with our experts
Feedback