400G OSFP_4X100G QSFP56 passive copper cable assembly feature sixteen differential copper pairs, providing eight data transmission channels at speeds up to 56Gbps(PAM4) per channel, and meets 4X100G Ethernet and InfiniBand High Data Rate(HDR) requirements. Available in 26AWG and 30AWG wire gauges, this 400G OSFP_4X100G QSFP56 copper cable assembly features low insertion loss and low crosstalk. 400G OSFP_4X100G QSFP56 passive copper cable uses PAM4 signals for transmission, which doubles the rate. However, there are more stringent requirements for cable insertion loss. For detailed requirements, please see High Speed Characteristics.
· Compatible with IEEE 802.3cd
· Supports aggregate data rates of 4X100Gbps(PAM4)
· Optimized construction to minimize insertion loss and crosstalk
· Pull-to-release slide latch design
· Straight and break out assembly configurations available
· Customized cable braid termination limits EMI radiation
· Customizable EEPROM mapping for cable signature
· 26AWG and 30AWG cable
· 3.3V Power supply
· Temperature Range: 0 to 70 °C
· RoHs Compliant
General Product Characteristics
Parameter | Symbol |
Number of Lanes | Tx8 & Rx8(400G OSFP) Tx2 & Rx2(4X100G QSFP56) |
Channel Data Rate | 53.125Gbps |
Operating Temperature | 0 to + 70°C |
Storage Temperature | -40 to + 85°C |
Supply Voltage | 3.3 V nominal |
Electrical Interface | 60pins edge connector 38pins edge connector |
Management Interface | Serial, I2C |
High Speed Characteristics
Parameter | Symbol | Min | Typ | Max | Unit | Note |
Differential Impedance | TDR | 90 | 100 | 110 | Ώ | |
Insertion Loss | SDD21 | -17.16 | dB | At 13.28 GHz | ||
Differential Return Loss | SDD11
| See 1 | dB | At 0.05 to 4.1 GHz | ||
SDD22 | See 2 | dB | At 4.1 to 19 GHz | |||
Common-Mode to Common-Mode Output Return Loss | SCC11 SCC22 | -2 | dB | At 0.2 to 19 GHz | ||
Differential to Common-Mode ReturnLoss | SCD11 | See 3 | dB | At 0.01 to 12.89 GHz | ||
SCD22 | See 4 | At 12.89 to 19 GHz | ||||
Differential to Common Mode Conversion Loss | SCD21-IL | -10 | dB | At 0.01 to 12.89 GHz | ||
See 5 | At 12.89 to 15.7 GHz | |||||
-6.3 | At 15.7 to 19 GHz |
Notes:
1. Reflection Coefficient given by equation SDD11(dB) < -16.5 + 2 × SQRT(f ), with f in GHz.
2. Reflection Coefficient given by equation SDD11(dB) < -10.66 + 14 × log10(f/5.5), with f in GHz.
3. Reflection Coefficient given by equation SCD11(dB) < -22 + (20/25.78)*f, with f in GHz.
4. Reflection Coefficient given by equation SCD11(dB) < -15 + (6/25.78)*f, with f in GHz.
5. Reflection Coefficient given by equation SCD21(dB) < -27 + (29/22)*f, with f in GHz.
Note: The connector is compatible with the SFF8024 and SFF8672 specification.
OSFP 800G ACC Cable
OSFP 800G DAC Cable
800G OSFP to 4x200G Breakout ACC
400G OSFP to 400G QSFP-DD DAC
400G QSFP DD DAC Cable
400G QSFP DD to 4X100G QSFP56 AOC
400G QSFP DD to 4X100G QSFP28 AOC
400G OSFP to 2x200G QSFP56 AOC Breakout Cable
400G QSFP DD AOC Cable
400G QSFP DD AOC Breakout Cable
200G QSFP56 InfiniBand HDR AOC
200G QSFP56 PSM4 DAC
QSFP28 100G AOC Cable
QSFP28 100G DAC Cable
QSFP AQ AOC 4G 10
QSFP+ 40G DAC Cable
QSFP+ 40G AOC Cable
QSFP AQ LP 31 10 MPO3
MTP/MPO Harness Assemblies
SFPP AT AOC Cable
100G to 25G Adapter
10G SFP+ Passive Copper Twinax Cable
QSFP CVR 10G