Ascent’s AMP300 is a cost-effective multipurpose video processing platform useful for various video delivery applications.
• Compact modular design: 1RU with 3 modules
• Supports up to 4 Gbps video multiplexing and TS stream multiplexing/grooming
• Supports EIT multiplexing (optional) and EPG/SI insertion (both DVB and ATSC standard)
• Embedded ASI/IP interfaces in the main chassis
• Dual redundancy power supply (optional)
• Easy configuration tools: Web-UI and SNMP
• Easy upgrade to new technologies with only module replacement
• Low power consumption and high reliability with MTBF (Mean Time Between Failure) ≥100,000 hours
Capacity | 4 Gbps (approx. 1000 programs) |
Slot Number | 3 slots |
Interface | 2 × ASI Inputs (BNC, Female, 75 Ω ports) |
2 × ASI outputs (BNC, Female, 75 Ω ports) | |
1 × GbE TS/IP (RJ45) | |
1 × management (RJ45) | |
ASI (On‑Chassis) | |
Bit Rate per Port | 1 MPTS/SPTS at max. 100Mbps per port |
Multiplexing | |
Routing | Any input to any output |
Table Supported | SI/PSI/PSIP |
PID Processing | Pass‑through, remapping, filtering |
EIT Processing | Re‑multiplexing (optional) and pass‑through |
External Data | EPG and SI insertion |
Management | |
Hardware Interface | 1 × RJ45 (100 Mbps) |
User Interface | LED indicators |
LCD screen | |
Front panel control | |
Web UI | |
SNMP (monitoring only) | |
IP (On‑Chassis) | |
Protocol | TS over UDP/RTP, unicast/multicast |
MPEG TS | MPTS and SPTS |
Channel | 64 streams input 32 streams output |
Bit Rate per Port | Max. 780 Mbps (effective 650 Mbps) |
De‑jittering | PCR |
Management | IGMP V1, IGMP V2, IGMP V3 |
FEC | ProMPEG, input and output |
Physical | |
Input Voltage | 90 VAC to 260 VAC |
Dual Power Supply | Optional |
Power Consumption | Max. 60 W |
Chassis Dimensions (W × H × D) | 480 mm × 44 mm × 440 mm, 1RU |
Operating Temperature | 0 °C to 50 °C |
Storage Temperature | ‑10 °C to 70 °C |
Operating Humidity | <95 % RH |
MTBF | ≥100,000 hours |
