ACT AS200 Fiber Ethernet CPE switch is a series of Layer 2 Gigabit Ethernet CPE Switches, which switch traditional twisted pair RJ-45 cable into variable fiber media including multi-mode, single mode, SC/ST connector, bi-directional WDM, or SFP slot for pluggable fiber transceiver. The traditional transmission distance of 100m over RJ-45 copper can be extended from 550m to 100km over fiber.
• SOHO and residential Gigbit Ethernet CPE Switch for FTTX service deployment
• Auto-Cross over for MDI/MDI-X in TP port
• WAN Port 1000Base-X x 1 or 10/100/1000Base-T
• LAN Port 4 Port RJ45 10/100/1000Mbps
• Flexible Auto Provision Schemes
• Built-in Fibre Management Tray to keep excessive cable inside the box
• 9K byte Jumbo Frame
• Support IGMP Snooping V1/V2 to quickly plug and play for IPTV service deployment without complicated configuration setting required
AS200 Wireless FTTx Residential Gateway
LAN Ethernet Ports | 10/100/1000Base‑T RJ‑45 x 4, auto MDI/MDIX | |||
WAN Ports | 1000Base‑X x 1 or 10/100/1000Base‑T x 1 | |||
H/W Specification | ||||
Switching | Store and forward switching mechanism | |||
MDI | Auto‑Cross over for MDI/MDI‑X in TP port | |||
Auto Negotiation | Auto‑Negotiation in TP port | |||
Full/Half Duplex | Full/Half Duplex Mode Operation | |||
Frame | Jumbo Frame up to 9K bytes | |||
IGMP | IGMP Snooping V1/V2 | |||
Address Table | 2K MAC address table | |||
Memory | 128K bytes memory buffer | |||
Standards | ||||
IEEE 802.3 10Base‑T, IEEE 802.3u 100Base‑TX/FX | ||||
IEEE 802.3ab 1000Base‑T | ||||
IEEE 802.3z 1000Base‑X | ||||
IEEE 802.3x Flow Control | ||||
LED | ||||
LED Light | LAN, POWER, WAN | |||
General Specifications | ||||
Operating Temp, °C | 0 to 50 | |||
Storage Temp, °C | ‑20 to 60 | |||
Power Supply | 100 to 240 VAC or 12V/1.5A DC | |||
Operating relative humidity, % | 5 to 95 | |||
Power Consumption W | 7.29 (from wall) | |||
Dimensions (W x D x H) | 160 x 116 x 45 mm | |||
Weight, kg | 0.57 kg (shipping) | |||
