ACT AMC310 Series 10Gigabit Ethernet Media Converter is the latest series of high performance converter, which complies with IEEE 802.3an and 802.3ae standards. It has one 10GbE SFP+/XFP port and one 10 GE RJ45 port. It supports two types’ media for network connection such as 10GBase-T and 10GBase-SR/LR/ER/ZR. The media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly.
• Transparent Transport and very low delay
• Support ITUT prescribed DWDM/CWDM wavelength
• Support DMI function for SFP+/XFP fiber module
• Support Loopback test function
• Economic In-band Management function
• Powerful Network Management function(Web, SNMP, Console)
• Support hot plugging
• Support 2U Rack (16 channel) and standalone use
• Full State Led display
• Easy installation
• UTP cable length detection(only RJ45 interface)
• Provide reliable long-distance connection
• Fast connection with multi-function
• Small portable size case
• Plug and play
Module Card | SFP+ Module Card | XFP Module card | |||
Type A | Type B | ||||
Interface | Port A | SFP+ | XFP | ||
Port B | RJ45 | RJ45 | |||
Transmission Speed | 10G | 10G | |||
Data | Technical Indexes | ||||
Protocols | IEEE802.3an(10Gbase‑T), IEEE802.3ae(10Gbase‑SR/LR/ER/ZR) | Access Type | 10G LAN | ||
Transmission Distance | SFP+ module: Up to 80Km | ||||
Maximum Packet Forwarding Rate | 14,880,950/S | ||||
Network management | • Card type information | ||||
Power requirement | Rack‑mountable : AC 85 to 220V OR DC ‑48V | ||||
Work Environment | Operating Temp: 0 to 50 °C | ||||
Dimension | Card : 11.5mm(W)×78mm(D) | ||||
Repeater Card | |||||
Transmission Speed | 10Gb/s ( 9.95Gb/s‑11.35Gb/s ) | ||||
Protocols | IEEE802.3ae (10Gbase‑SR/LR/ER/ZR/LRM) | ||||
Access Type | 10G LAN/ 10G WAN | ||||
Interface Type | A Type: SFP+ To SFP+ B Type: SFP+ To XFP C Type: XFP To XFP | ||||
Transmission Distance | SFP+ module: Up to 80Km XFP module: Up to 80Km | ||||
Maximum Packet Forwarding Rate | 14,880,950/S | ||||
Network management information: | SFP+ or XFP fiber module detection SFP+ or XFP fiber module DMI function ( Temperature , Voltage , Optical power ) Link status detector Enable/Disabled Loopback test function Rate select ( 10Gbase‑Lan or Wan ) | ||||
power requirement | Standalone: AC 220V OR DC ‑48V Power consumption: ≤6W | ||||
Work Environment | Operating Temp: 0 to 50 °C Storage Temp: ‑10 to 70 °C Humidity: 5% to 90% ( non‑condensing ) | ||||
Dimension | Standalone: 173mm ( W ) × 106mm ( D ) × 33mm ( H ) | ||||
