ACT AP9009 GEPON OLT series Platform is a high density, high performance L2/L3/L4 switch which provides Network Operators and Services Providers with the powerful aggregation layer for the 802.3ah Gigabit Ethernet Passive Optical Network (GEPON) services in Fiber to The Home/Business (FTTH & FTTB) networks.
• High density Gigabit Ethernet PON platform supports up to 3584 subscribers per chassis
• High performance L2/L3/L4 switching with IPv6 supported* (IPv6 future feature)
• Passive backplane supporting 352 Gbps switching fabric
• Up to 4 x 10 Gbps uplinks with XFP ports with link aggregation
• High-level security supporting extended ACL, DAP, RADIUS, and Intelligent ARP defence
• Strict QoS with 802.1p, Diffserv, and L2-L4 flow classification
• Support uplink/downlink encryption
• Dual hot-swappable redundant switching and controller cards
• Dual hot-swappable power supplies for redundancy
• Shelf management for monitoring and control via network. CLI and SNMP access
• Upgrading single or multiple ONUs at the same time
• Supporting backbone optical-fiber protection, “1+1” protection, switchover delay of less than 50ms
• RADIUS-based broadband management and customer SLA control
AP900x Gigabit Ethernet PON Platform - 19” 2RU and 9RU
PON Wavelength | Downlink 1490nm; Uplink 1310nm |
Data Rate | Symmetric uplink and downlink: 1.25G |
PON TX Power | +2dbm to +7dbm |
PON RX level (Low) | -30dBm |
Max PON Coupling Ratio | 1: 64 |
EMS Manager | SNMP (Simple Network Management Protocol), CLI (Command Line Interface) Standard OAM and expanded OAM management |
Power Supply | AC 90-240Vac, 50/60 Hz or DC -48VDC |
Operating Temperature | 0 to 50 °C optimal performance 15 to 35 °C |
Relative Humidity | 10% to 90% no condensation |
Dimensions (W x D x H) | 315×397×482 mm |
Weight | Empty chassis: 30 kg ; With all card slots occupied: 64 kg |
Ship Weight | 82 kg |
AP9002 | AP9009 | |
Height (RU) | 2 | 9 |
Total slot quantity (incl. Control Unit ) | 5 | 16 |
PON OLT (1G) slot quantity | 4 (2 PON card) | 12 (4-PON card) |
Enhanced (10G) slot quantity | 0 | 2 |
Console panel quantity | 1 | 2 (Redundancy) |
Backplane bandwidth | 20Gbps | 352Gbps |
Maximum # of 10G ports | 0 | 4 |
Maximum # of 1G ports | 16 (8 Uplink) | 56 ( incl. 10G Slots ) |
Maximum # of PON ports | 8 | 56 ( incl. 10G Slots ) |
Max Power consumption | 80W | 300W |
