ACT offers a complete line of DWDMs, CWDMs, WDMs, OADMs, Couplers, DCM, Optical Shelf and Accessories. The Wavelength Division Multiplexers (WDMs) feature low insertion loss, high isolation and excellent wavelength stability.
• Precise mechanical dimensions
• Low insertion loss, high return loss
• Comply standard of IEC61754‑4
• Repeatable times no less than 50 times
• Long life span design over 30 years
SC/APC
Type | Specification |
Optical Fiber Diameter | 125 µm (6571A1 & 657A2) |
Tight Buffer Diameter | 250 µm |
Fiber Mode | Single‑mode |
Operation Time | About 60 s (no fiber cutting) |
Insertion Loss | ≤0.3 dB (1310 nm & 1550 nm) |
Return Loss | ≥50 dB |
Bare Fiber Fastening Strength | >5 N |
Bare Fiber Holder Fastening Strength | >10 N |
Tensile Strength | >40 N |
Operating Temperature | ‑40 °C to +75 °C |
On‑Line Tensile Strength (20 N) | ΔIL ≤ 0.3 dB ΔRL ≤ 5 dB |
Mechanical Durability (500 Cycles) | ΔIL ≤ 0.3 dB ΔRL ≤ 5 dB |
Drop‑Off Test1 | ΔIL ≤ 0.3 dB ΔRL ≤ 5 dB |
SC/UPC
Type | Specification |
Optical Fiber Diameter | 125 µm (6571A1 & 657A2) |
Tight Buffer Diameter | 250 µm |
Fiber Mode | Single‑mode |
Operation Time | About 60 s (no fiber cutting) |
Insertion Loss | ≤0.3 dB (1310 nm & 1550 nm) |
Return Loss | ≤‑40 dB |
Bare Fiber Fastening Strength | >5 N |
Bare Fiber Holder Fastening Strength | >10 N |
Tensile Strength | >50 N |
Operating Temperature | ‑40 °C to +75 °C |
On‑Line Tensile Strength (20 N) | ΔIL ≤ 0.5 dB ΔRL ≤ 5 dB |
Mechanical Durability (500 Cycles) | ΔIL ≤ 0.5 dB ΔRL ≤ 5 dB |
Drop‑Off Test1 | ΔIL ≤ 0.5 dB ΔRL ≤ 5 dB |
